top of page
ddlogo.jpg

☞ TO VIEW CURRENT PRICING, CLICK THE PAYPAL CHECK-OUT BUTTON!

dd1ch.jpg

D1100 D SERIES MONO AMPLIFIER

D Series amplifiers are compact amplifiers with full size features. The D1100 is a 1 ohm stable monoblock subwoofer amplifier with a total output power of 1100 watts. Precision tuning is made easy with variable bandpass crossovers and LED clipping indicator. Installation is made easier with single side controls and connections, and auto turn-on options.  For powersports applications conformal coated internal circuitry and corrosion proof switches offer increased moisture resistance.

 Operating Voltage : 9 - 16

 Test Voltage : 14.4

 Input Channel(s) : 1

 Output Channel(s) : 1

 Continuous Wattage @4ohm : 380 x 1

 Continuous Wattage @2ohm : 700 x 1

 Continuous Wattage @1ohm : 1100 x 1

 FREE SHIPPING ON THIS ITEM!

☞ Send Us a Message for an Audio Consultation:

MotorcycleAudio12v@gmail.com

dd4ch.jpg

D4.800 D SERIES 4CH AMPLIFIER

In many of today’s installs, wattage per square inch is a deciding factor on what amplifier gets the job. For the D4.800, DD’s engineers were able to take the existing D4.800’s compact chassis, which is only 7” x 4” x 1.7”, and increase the total output by 20%. The D4.800 can cleanly produce 200 watts per channel for a staggering 800 watts of total power. The D4.800 also has conformal coated internal components and sealed back switches making it perfect for motorcycle, boat, and powersport applications.

 Operating Voltage : 9 - 16

 Test Voltage : 14.4

 Output Channel(s) : 4

 Continuous Wattage @4ohm : 4 x 125 / 2 x 400

 Continuous Wattage @2ohm : 4 x 200

 FREE SHIPPING ON THIS ITEM!

☞ Send Us a Message for an Audio Consultation:

MotorcycleAudio12v@gmail.com

dd4ch1.jpg

D4.200 D SERIES 4CH AMPLIFIER

D Series amplifiers are compact amplifiers with full size features. The D4.200 is a bridgeable four channel amplifier with a total output of 2200 watts. It is 1 ohm stereo stable making it perfect for multi driver arrays. Precision tuning is made easy with variable bandpass crossovers and LED clipping indicators. Installation is made easier with single side controls and connections, input mode switches, and signal sense auto turn-on.  For powersports applications conformal coated internal circuitry and corrosion proof switches offer increased moisture resistance.

 Operating Voltage : 9 - 16

 Test Voltage : 14.4

 Output Channel(s) : 4

 Continuous Wattage @4ohm : 200 x 4 / 700 x 2

 Continuous Wattage @2ohm : 370 x 4 / 1040 x 2

 Continuous Wattage @1ohm : 550 x 4

 FREE SHIPPING ON THIS ITEM!

☞ Send Us a Message for an Audio Consultation:

MotorcycleAudio12v@gmail.com

dd1.jpg

D5.350 D SERIES 5CH AMPLIFIER

D Series amplifiers are compact amplifiers with full size features. The D5.350 is a five channel amplifier designed to power an entire audio system while taking up minimal space. It has a four channel section with a total output power of 560 watts and a 350 watt dedicated sub section. Precision tuning is made easy with variable bandpass crossovers and LED clipping indicators. Installation is made easier with single side controls and connections, input mode switches, and auto turn-on options.  For powersports applications conformal coated internal circuitry and corrosion proof switches offer increased moisture resistance.

 Operating Voltage : 9 - 16

 Test Voltage : 14.4

 Input Channel(s) : 1

 Output Channel(s) : 5

 Continuous Wattage @4ohm : (CH1~4) 85 x 4 / 280 x 2 (CH5) 130 x 1

 Continuous Wattage @2ohm : (CH1~4) 140 x 4 (CH5) 230 x 1

 Continuous Wattage @1ohm : (CH5) 350 x 1

 FREE SHIPPING ON THIS ITEM!

☞ Send Us a Message for an Audio Consultation:

MotorcycleAudio12v@gmail.com

dd4.jpg

VO-XN6.5a 6.5 Inch HP COAXIAL NEO SPEAKERS

The DD VO-XN drivers continue the Voice Optimized tradition of blending the latest in Hi-Fidelity technology with the qualities of high-end Pro Audio to produce a tonally smooth, low distortion frequency response over a wide bandwidth through an undeniably powerful broadcast, giving listeners near and far a gratifying interaction with loud and clear audio. These midbass drivers can cover the critical frequency area from below 100Hz to 20kHz, making system design easy.

 Speaker Size (In) : 6.5

 Tweeter Size (In) : 1

 Watts RMS : 200

 Watts Peak : 400

 Impedance : S4

 VCD (In) : 1.5

 Frequency Response (Hz) : 85 - 20k

 FREE SHIPPING ON THIS ITEM!

☞ Send Us a Message for an Audio Consultation:

MotorcycleAudio12v@gmail.com

dd6.jpg

VO-XN6x9a 6x9 Inch HP COAXIAL NEO SPEAKERS

The DD VO-XN drivers continue the Voice Optimized tradition of blending the latest in Hi-Fidelity technology with the qualities of high-end Pro Audio to produce a tonally smooth, low distortion frequency response over a wide bandwidth through an undeniably powerful broadcast, giving listeners near and far a gratifying interaction with loud and clear audio. These midbass drivers can cover the critical frequency area from below 100Hz to 20kHz, making system design easy.

 Speaker Size (In) : 6x9

 Tweeter Size (In) : 1

 Watts RMS : 200

 Watts Peak : 400

 Impedance : S4

 VCD (In) : 1.5

 Frequency Response (Hz) : 85 - 20k

 FREE SHIPPING ON THIS ITEM!

☞ Send Us a Message for an Audio Consultation:

MotorcycleAudio12v@gmail.com

dd3.jpg

VO-XN8 8 Inch HP COAXIAL NEO SPEAKERS

The DD VO-XN drivers continue the Voice Optimized tradition of blending the latest in Hi-Fidelity technology with the qualities of high-end Pro Audio to produce a tonally smooth, low distortion frequency response over a wide bandwidth through an undeniably powerful broadcast, giving listeners near and far a gratifying interaction with loud and clear audio. These midbass drivers can cover the critical frequency area from below 100Hz to 20kHz, making system design easy.

 Speaker Size (In) : 8

 Tweeter Size (In) : 1

 Watts RMS : 75

 Watts Peak : 300

 Impedance : S4

 VCD (In) : 1.5

 Frequency Response (Hz) : 90 - 20k

 FREE SHIPPING ON THIS ITEM!

☞ Send Us a Message for an Audio Consultation:

MotorcycleAudio12v@gmail.com

dd12.jpg

VO-W8b 8 Inch COAXIAL WOOFERS

The VO-W woofers are PA style, high output woofers designed for enthusiasts who want sound quality and high output. By combining design elements from pro audio and high-end car audio, DD has developed a new type of ultra-efficient driver aimed at delivering high levels of clean output. The VO-W woofers feature performance refinements like large diameter voice coils, high-energy motors, cast frames, and the unique ability to thread on our VO-CT compression tweeters for coaxial applications. The low moving mass design coupled with tight motor tolerance produces ultra fast transients and high output able to keep up with any subwoofer system, or you can use them as stand-alone PA drives. The VO-W Woofers will transform an ordinary system into a concert level crowd pleaser.

 

Pictured with the CT-25 and CT-AL HORN which is included.

 Speaker Size (In) : 8

 Watts RMS : 150

 Watts Peak : 450

 Impedance : S4

 VCD (In) : 2.5

 Frequency Response (Hz) : 75 - 20k

 FREE SHIPPING ON THIS ITEM!

☞ Send Us a Message for an Audio Consultation:

MotorcycleAudio12v@gmail.com

dd5.jpg

VO-X6.5 6.5 Inch COAXIAL SPEAKERS

The DD VO-X drivers continue the Voice Optimized tradition of blending the latest in Hi-Fidelity technology with the qualities of high-end Pro Audio to produce a tonally smooth, low distortion frequency response over a wide bandwidth through an undeniably powerful broadcast, giving listeners near and far a gratifying interaction with loud and clear audio. These midbass drivers can cover the critical frequency area from below 100Hz to 20kHz, making system design easy and they include exclusive adventure ready design features for a variety of applications.

 Speaker Size (In) : 6.5

 Tweeter Size (In) : 1

 Watts RMS : 150

 Watts Peak : 300

 Impedance : S4

 VCD (In) : 1.5

 Frequency Response (Hz) : 85 - 20k

 FREE SHIPPING ON THIS ITEM!

☞ Send Us a Message for an Audio Consultation:

MotorcycleAudio12v@gmail.com

dd7.jpg

VO-X6x9 6x9 Inch COAXIAL SPEAKERS

The DD VO-X drivers continue the Voice Optimized tradition of blending the latest in Hi-Fidelity technology with the qualities of high-end Pro Audio to produce a tonally smooth, low distortion frequency response over a wide bandwidth through an undeniably powerful broadcast, giving listeners near and far a gratifying interaction with loud and clear audio. These midbass drivers can cover the critical frequency area from below 100Hz to 20kHz, making system design easy and they include exclusive adventure ready design features for a variety of applications.

 Speaker Size (In) : 6x9

 Tweeter Size (In) : 1

 Watts RMS : 150

 Watts Peak : 300

 Impedance : S4

 VCD (In) : 1.5

 Frequency Response (Hz) : 65 - 20k

 FREE SHIPPING ON THIS ITEM!

☞ Send Us a Message for an Audio Consultation:

MotorcycleAudio12v@gmail.com

dd9.jpg

VO-M6.5b 6.5 Inch MIDRANGE SPEAKERS

The VO-M6.5b is a PA style midrange that combines design elements from pro audio and high-end car audio for a new type of highly efficient driver aimed at delivering high levels of clean output from stock speaker locations. This allows you to transform stock sound to concert level without cutting up interior panels. If you really want to get those crazy, outdoor PA type systems, they’re just a simple array away.

 

 Speaker Size (In) : 6.5

 Watts RMS : 100

 Watts Peak : 300

 Impedance : S4

 VCD (In) : 1.5

 Frequency Response (Hz) : 100 - 8k

 FREE SHIPPING ON THIS ITEM!

☞ Send Us a Message for an Audio Consultation:

MotorcycleAudio12v@gmail.com

dd11.jpg

VO-M6x9b 6x9 Inch MIDRANGE SPEAKERS

The DD VO-M6x9b drivers are a hybrid combination of innovations from both Hi Fidelity and Hi-end Pro Audio. These use specifically engineered parts to cover high sensitivity/output with the lowest distortion for clean, smooth and detailed frequency response.

The VO-M drivers use long fiber pressed cones made with water resistant synthetic resin to achieve high rigidity AND ultra light moving mass, essential for high sensitivity and upper extended frequency response. The curvilinear cone profile ensures smooth frequency response into the upper octaves.

 Speaker Size (In) : 6x9

 Watts RMS : 100

 Watts Peak : 300

 Impedance : S4

 VCD (In) : 1.5

 Frequency Response (Hz) : 80 - 8k

 FREE SHIPPING ON THIS ITEM!

☞ Send Us a Message for an Audio Consultation:

MotorcycleAudio12v@gmail.com

dd8.jpg

VO-B3 1 Inch HORN BULLET TWEETERS

The VO-B3 is truly a PA-Style bullet tweeter designed for the mobile environment. When it comes to PA style products, many companies simply use off the shelf parts and slap their name on it, but that’s not DD’s style. We wanted to make the best sounding, easiest mounting high output tweeters on the market. That’s why DD designed the VO-B3 and VO-B4. The VO-B3 custom CNC body is designed to be as short as possible to allow for easy mounting in motorcycle fairings and speaker lids. Another unique feature of the VO-B3 is its dual mounting options. You have the option to flush mount with the trim bezel and back nut or for more space-constrained installs you can top mount using the machined screw holes in the tweeter body.

 Tweeter Size (In) : 1

 Watts RMS : 50

 Watts Peak : 100

 Impedance : S4

 VCD (In) : 25.4

 Frequency Response (Hz) : 3k - 20k

 FREE SHIPPING ON THIS ITEM!

☞ Send Us a Message for an Audio Consultation:

MotorcycleAudio12v@gmail.com

dd10.jpg

VO-B4 1 .5 Inch HORN BULLET TWEETERS

The VO-B4 is truly a PA-Style bullet tweeter designed for the mobile environment. When it comes to PA style products, many companies simply use off the shelf parts and slap their name on it, but that’s not DD’s style. We wanted to make the best sounding, easiest mounting high output tweeters on the market. That’s why we designed the VO-B3 and VO-B4. The VO-B4 custom CNC body is designed to be as short as possible to allow for easy mounting in door panels and motorcycle fairings. We also opened up the horn body compared to similarly styled tweeters. This allows you to get a wider field of sound in close proximity to the tweeter. Another unique feature of the VO-B4 is its dual mounting options. You have the option to flush mount with the trim bezel and back nut or for more space-constrained installs you can top mount using the machined screw holes in the tweeter body.

 Tweeter Size (In) : 1.5

 Watts RMS : 50

 Watts Peak : 150

 Impedance : S4

 VCD (In) : 38.6

 Frequency Response (Hz) : 2k - 20k

 FREE SHIPPING ON THIS ITEM!

☞ Send Us a Message for an Audio Consultation:

MotorcycleAudio12v@gmail.com

dd2.jpg

SL610 10 Inch SHALLOW SUBWOOFER

The SL600 Series subwoofers give you the bass you want, in almost any space you want to put it. They feature super shallow mounting depths, and the suspensions have been tuned to perform in sealed and small vented enclosures.  To maintain power handling, cooling and excursion the SL600s utilize full size sub features such as 2.5″ high temperature voice coil, 72oz magnet, back plate coil gap venting, and an EROM surround. One of the features unique to the SL600s is the triple layer shallow body cone. By compressing a layer of foam between two layers of pulp the cone is kept as light and rigid as a standard cone, yet shallow enough to allow suspension travel equal to a full size sub. 

 Speaker Size (In) : 10

 Watts RMS : 300 - 600

 Watts Peak : 1200

 Impedance : D2 or D4

 VCD (In) : 2.5

 Frequency Response (Hz) : 29+

 FREE SHIPPING ON THIS ITEM!

☞ Send Us a Message for an Audio Consultation:

MotorcycleAudio12v@gmail.com

ddbag.jpg

HD8-SBK 8 Inch HARLEY SADDLEBAG KIT

While most mounting kits simply convert saddle bags into loaded enclosures, DD’s Made in the USA kit allows riders to store bulky items and sensibly packed loose items in the front of the same bag as their fully enclosed 8” speaker without serious concern for the items or the speaker. The HD8-SBK also features a built-in utility tray with bungee straps, so riders can easily secure and quickly access small items stored in the bags. To protect speaker soft parts from road debris, DD includes an 8 inch matte black aluminum grill. This kit underwent thorough testing and prototyping with DD’s VO-W8, VO-XN8, VO-MN8, VO-M8 and RL-SW08 speakers to ensure optimum performance and compatibility. The clean design was tailor made for stock saddlebags on Harley-Davidson Street Glides, Road Glides, Ultra Glides, Electra Glides and Road Kings from 2014 to today. With professional installation, this USA Made kit will fit like a glove and look as if it came included fresh off Harley’s US factory line.

 Made in the USA

 CNC Machined

 Powder Coated Aluminum Grills

 Left & Right Woofer Enclosures

 Small Item Tray

 Subwoofers Sold Seperately

 FREE SHIPPING ON THIS ITEM!

☞ Send Us a Message for an Audio Consultation:

MotorcycleAudio12v@gmail.com

bottom of page